User Manual

4-6

4.94.9

4.9

Level 2 MaintenanceLevel 2 Maintenance

Level 2 Maintenance

Level 2 maintenance includes lubrication, adjustment, and parts replacement. Level 1 maintenance should be

done at the same time as level 2 maintenance.

4.9.1 Parts replacement

Remember the following notes when replacing any component.

• Keep assembly areas clean.

• Turn off power to equipment and unplug it before disassembly or assembly.

• Follow procedures carefully. Do not disassemble parts that are not to be disassembled.

• Store disassembled parts in a clean place where they will not get lost.

• Check parts for number and shape after replacement, and adjust them if necessary.

• Reassemble the printer following the steps in reverse order of disassembly.

• Confirm that all connectors are connected correctly.