Replacement Part List
23
WARNING
IMPORTANT SAFETY INSTRUCTIONS
•This portable luminaire has a polarized plug (one blade is wider than the other) as a feature to reduce the risk of electric
shock. This plug will t in a polarized outlet only one way.
•If the plug does not t fully in the outlet, reverse the plug. If it still does not t, contact a qualied electrician.
•Never use with an extension cord unless plug can be fully inserted.
•Do not alter the plug.
!
Programming Additional Accessories
1. Press and hold the SET/PRGM button on the opener for 2-5 seconds.
• The ROUND LED will turn BLUE. Release button.
• The LONG LED will then ash PURPLE.
2. Press wall console main button 3 times slowly. Door should run.
The original wireless wall console and light kits are pre-programmed from the factory. However, if adding an
additional WIRELESS WALL CONSOLE or LIGHT FIXTURE to this unit or either original require reprogramming
for any reason, follow the instructions below.
• WIRELESS WALL CONSOLE
• PAIRING LIGHT FIXTURE WITH OPENER
The light kit and opener will auto-pair upon both devices being powered up. Once
paired the devices will not attempt to pair with other devices until the paired devices
are cleared.
1. Ensure no other unpaired openers and light kits are powered up in the vicinity.
2. Power up opener.
3. Power up light xture.
4. The light xture will beep and ash briey upon power-up followed by a longer ash
to notify that it has paired with the opener.
• CLEARING LIGHT FIXTURE PAIR FROM THE OPENER
1. Ensure no other unpaired light xtures are powered up in the vicinity except for the
light you intend to pair.
2. Press and hold the SET/PGRM button on the opener until the long LED turns green.
3. Release the SET/PGRM button.
• CLEARING OPENER PAIR FROM THE LIGHT FIXTURE
1. Ensure no other unpaired openers are powered up in the vicinity except for the
opener you intend to pair.
2. Open lens cover on LED light xture.
3. Press and hold light xture pairing button for ve seconds.
4. Release light xture pairing button. The light xture will beep for approximately two
seconds to indicate the opener pairing has been cleared.
• LIGHT FIXTURE INCLUDED WITH OPENER:
1. Power up Wall Mount Opener.
2. Power LIGHT FIXTURE.
3. LIGHT FIXTURE will ash and beep briey.
4. LIGHT FIXTURE will ash again indicating that it is now paired to the opener.