User's Manual

ManualsBrandsGenie ManualsElectronicsRemote Control Transmitter for Garage Door Opener Operation

INSTALLER: LEAVE THIS MANUAL WITH HOMEOWNER

HOMEOWNER: SAVE THIS MANUAL FOR FUTURE REFERENCE

Includes

CodeDodger

Remote Control.

The Included

Safe-T-Beam® system

MUST be installed to close the door. DO NOT use other brands or types.

For use with residential sectional overhead garage doors ONLY.

Homelink® and Car2U® compatible

38485503373

Serial Number Decal

Alternate language manuals available at:

Idioma alternativo manuales disponibles en:

Autre langue manuels disponibles à:

www.OverheadDoor.com

To reduce the risk of injury to persons or damage to property, use this opener only with a sectional residential door.

WARNING

Por reduire le risque de blessures ou de dommages materials, utillsez cet ouvre-porte uniquement pour une porte

a section re sidentielie.

AVERTISSEMENT

Legacy 1029

Legacy 2029

BELT/CHAIN DRIVE GARAGE DOOR OPENER MODELS

PROGRAMMING, OPERATION & MAINTENANCE MANUAL

All other trademarks are property of their rightful owners. Consistent with our policy of continuing product improvements, we reserve the

right to change product specications without prior notice or obligations. HomeLink is a registered trademark of Gentex Corporation. Car2U is

a registered trademark of Lear Corporation.

STOP

Need help or have questions?

For answers and assistance,

visit www.OverheadDoor.com

or call Customer Service at: 1-800-929-3667

Summary of content (14 pages)

PAGE 1
Serial Number Decal BELT/CHAIN DRIVE GARAGE DOOR OPENER MODELS Legacy 1029 Legacy 2029 PROGRAMMING, OPERATION & MAINTENANCE MANUAL Includes CodeDodger® Remote Control. The Included Safe-T-Beam® system MUST be installed to close the door. DO NOT use other brands or types. For use with residential sectional overhead garage doors ONLY. Homelink® and Car2U® compatible STOP Need help or have questions? For answers and assistance, visit www.OverheadDoor.
PAGE 2
INDEX 1 Safety Information Safety Notifications.................................................. 4 Important Safety Instructions.............................. 5 2 Features Safety Features.......................................................... 6 Opener Features....................................................... 6 3 Programming Information Introduction............................................................... 7 Overview of Powerhead Controls......................
PAGE 3
Thank you for purchasing an Overhead Door® brand garage door opener. The leader in garage door opener technology. Please take a moment to preview this manual. Pay particular attention to all Safety Warnings, Cautions and Information. Remember, your garage door is the largest and heaviest moving object in your home.
PAGE 4
SAFETY NOTIFICATIONS & INSTRUCTIONS 1 OVERVIEW OF POTENTIAL HAZARDS READ THIS SAFETY INFORMATION Garage doors are large, heavy objects that move with the help of springs under high tension and electric motors. Since moving objects, springs under tension, and electric motors can cause injuries, your safety and the safety of others depend on you reading the information in this manual.
PAGE 5
IMPORTANT INSTALLATION INSTRUCTIONS ! WARNING TO REDUCE THE RISK OF SEVERE INJURY OR DEATH READ AND FOLLOW ALL SAFETY, INSTALLATION AND OPERATION INSTRUCTIONS. If you have any questions or do not understand an instruction, call The Overhead Door Corp. • DO NOT install opener on an improperly balanced door. An improperly balanced door could cause severe injury.
PAGE 6
SAFETY & STANDARD FEATURES 2 Safe-T-Beam® (STB) Non-Contact Reversing System Puts an invisible beam across the door opening. The door stops and reverses to the full open position if anything passes through the beam. LED indicator lights on the powerhead and on the STBs provide self-diagnostics if an operational problems exists. Door Detect™ Monitoring System Monitors the Safe-T-Beam® system to ensure proper functionality and will automatically stop and reverse a closing door if a problem is detected.
PAGE 7
3 OPENER PROGRAMMING NOTE: Before programming the opener, check to make sure there are no objects in the garage door opening. INTRODUCTION Now that the garage door opener is installed, follow the steps in this manual to program the opener so that the door opens and closes properly and all remote devices operate correctly. The following steps are a guide to setting opener so it functions properly. The following steps list the order of programming the opener’s functional settings for use. 1.
PAGE 8
PROGRAMMING DOWN TRAVEL LIMIT ! • • • • ! • • • • WARNING Make sure doorway is in full view and clear of obstacles and people to avoid injury or property damage. DO NOT operate this unit from the wall control before LIMITS are set. Severe damage to the opener could occur. The carriage MUST be engaged to turnbuckle BEFORE setting limits. See installation poster or call Customer Service at 1-800-929-3667 or visit www.OverheadDoor.com. DO NOT set limits with Battery Backup attached.
PAGE 9
PROGRAMMING UP TRAVEL LIMIT Programming UP Limit: 1. Press and hold the UP arrow button. • Long LED will light BLUE. 2. Release UP arrow button. • Round LED will flash BLUE. 1-2. Enter Programming Mode + Steady Blue 3. Press and hold the UP arrow button until door is fully open. • Use the DOWN arrow button if door opens too far. Use both UP and DOWN buttons to adjust open travel as necessary.
PAGE 10
PROGRAMMING FORCE AND CONTACT REVERSE Force Control Contact Reverse Test The force controls are automatically set when the wall control is used for the first time with garage door opener. The door MUST complete one full cycle, from full open to full close and then, full close to full open, before the settings are automatically recorded. NOTE: The limit and Force settings MUST BE COMPLETED before performing the Contact Reverse Test. ! WARNING 1.
PAGE 11
PROGRAMMING ADDITIONAL REMOTE CONTROLS THE REMOTE CONTROLS INCLUDED WITH THIS OPENER HAVE BEEN PROGRAMMED AT THE FACTORY FOR YOUR CONVENIENCE. NOTE: The following instructions are for remote control transmitters purchased separately in addition to those provided with this opener, but can also be used if any remote(s) may require re-programming. NOTE: Each programming step has a 30 second time limit for completion after the function is initiated.
PAGE 12
IMPORTANT SAFETY INSTRUCTIONS WARNING ! To reduce the risk of severe injury or death, read and follow all instructions. 1. 2. 3. 4. 5. 6. 7. NEVER let children operate or play with the door controls. Keep remote away from children. ALWAYS keep the moving door in sight and away from people and objects until door is completely closed. NO ONE SHOULD CROSS THE PATH OF THE MOVING DOOR. NEVER GO UNDER A STOPPED, PARTIALLY OPEN DOOR. Test opener monthly.
PAGE 13
4 MAINTENANCE & ADJUSTMENTS ! WARNING ! Use of any other wall control can cause unexpected operation of the door and loss of lighting feature. Locate wall console within sight of the door but far enough from door to prevent contacting it while operating the console. Control must be at least 5 feet above the floor to prevent small children from operating it. Regular Maintenance C.
PAGE 14
MAINTENANCE & ADJUSTMENTS F. Light Bulb Replacement ! • • • • • WARNING Use extreme caution when working from a ladder or step stool or serious injury can occur. When replacing light cover, make sure wires are not pinched or near moving parts. Use only properly rated incandescent, LED or CFL light bulbs. DO NOT use bulbs with a rating greater than 60 Watts. Use A19 size light bulbs. DO NOT use bulbs having a short neck. ! • • • • • Changing Light Bulbs Disconnect power to door opener.