Product Specifications

www.genielift.com
Effective Date: January, 2014. Product speci cations and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for
instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment
is the standard written warranty applicable to the particular product and sale and we make no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade names of Terex Corporation and/or their
subsidiaries in the USA and many other countries. Genie is a registered trademark of Terex South Dakota, Inc. © 2014 Terex Corporation.
Genie United States
18340 NE 76th Street
P.O. Box 97030
Redmond, Washington 98073-9730
Telephone [phone]
Toll Free in USA/Canada [phone]
Fax [phone]
Distributed By:
Features
GRJ 0210L. Part No. 127300
Aerial Work Platforms
Productivity
• Flashing beacon
• Biodegradable hydraulic oil
• Platform work lights
Options & Accessories
Measurements
GR-26J
• 31 ft 9 in (9.70 m) working height
• 8 ft 3 in (2.51 m) horizontal reach
• 21 ft 10.5 in up-and-over reach
• Up to 500 lbs (227 kg) lift capacity
• 4 ft 10 in (1.45 m) jib boom with 140°
working range
Productivity
• Standard steel platform 0.90 m x 0.75 m
(2 ft 11 in x 2 ft 5.5 in) with sliding midrail
• Hydraulic turntable rotation
• Fully proportional lift and drive system
• Drivable at full height
• Low 6 in (15 cm) platform entry height
• Maintenance free rigid steel hydraulic mast
• 44.8 in (1.14 m) compact width
• Low unit height of 6 ft 6 in (1.99 m)
• Low machine weight of 6,250 lbs (2,835 kg)
• Onboard diagnostic system
• AC power to platform
• Direct electric rear wheel drive with electric
parking brake
• Front wheel steering
• Brake release switch
• Reinforced ABS chassis covers
• Tie down attachments points
• Overhead crane attachment points
• Non-marking solid tires
• Drive enable system
• Horn
• Hour meter
• Tilt level sensor with audible alarm
• Platform overload sensing
• Manual platform lowering valve
• Emergency stop at both platform and
ground controls
Power
• Automatic 30 Amp 24 V battery
onboard charger
• 24 V DC (twelve 2V, 280 Ah
traction batteries)
• Battery charge indicator
Standard Features
Genie
®
Runabout
™
with Jib