Specifications

17
3.1.5 Using the LED Light
You can use the LED light to provide extra light when the lighting is
insufficient.
To enable the LED light, do the following:
1. Press the button to enter the OSD menu.
2. Press the / button to select
Auxiliary Light and press the
button.
3. Press the / button to select On
and press the button.
4. Press the button to exit the
menu.
Note:
Turn off LED lights when the battery is low.
When using LED lights for a long time, it may become hot. Take care not to touch the hot LED
lights.
3.1.6 Taking Snapshot
You can also use this device to take snapshots of the current scene.
From the standby screen, press the
button to take a snapshot.
Note:
If recording is in progress, press the button to stop the recording.