Operation Manual

English
-19-
the last three seconds. This allows you to get into the scene when taking group images.
1. Secure the camera to a tripod or place it on a stable surface.
2. Toggle the MODE button to
, and press the SET button.
3. Press the MENU button.
4. Select [Self Timer] using the
buttons and press the
button.
5. Use the / buttons to select [Yes], and press
the SET button.
 Toggle the
button to exit from the
menu mode.
6. Press the shutter button.
 The self-timer function is activated.
 To cancel the self-timer at any time, press the shutter button to disrupt the
sequence.
NOTE
 After an image is taken using self-timer, the self-timer mode is turned off.
 If you wish to take another image using the self-timer, repeat these steps.
Flash
The flash is designed to function automatically
when lighting conditions warrant the use of
flash. When you are in Normal mode (the
focus switch is set to
), you can take an
image using a flash mode suitable to your
circumstances.
1. Toggle the MODE button to
, and press
the SET button.
Downloaded from www.Manualslib.com manuals search engine