MATERIAL SAFETY DATA SHEETS For Lithium Battery Pack Prepared for : Shenzhen Lesongge Technology Co., Ltd Address : B412, Building H2, OCT East Industrial Zone, 1 Xiangshan East Street, Prepared by : EMTEK (DONGGUAN) CO., LTD Address : -1&2/F, BUILDING 2, ZONE A, ZHONGDA MARINE BIOTECHNOLOGY Guanghua Street Community, Shahe Street, Nanshan District, Shenzhen RESEARCH AND DEVELOPMENT BASE, NO.
MATERIAL SAFETY DATA SHEETS 1- Identification ·1.1 Product identifier ·Trade name: Lithium Battery Pack ·Registration number: No available data. ·UFI number: No available data. ·Other means of identification: Battery Model: SH18650-3S3P. Battery Capacity: 9000mAh Battery Voltage: 10.8V Weight：474.85g ·1.2 Relevant identified uses of the substance or mixture and uses advised against on ·Application of the substance/ mixture: Consumer uses, pool cleaning. ·Uses advised against: No available data.
2 - Hazards Identification ·2.1 Classification of the substance or mixture ·2.1.1 Classification according to regulation (EC) 1272/2008: Regulation (EC) No 1272/2008 Classification procedure [CLP] Acute Tox. 2 (inhal.), H330 Calculation method Skin Irrit. 2, H315 Calculation method Skin Sens. 1, H317 Calculation method Eye Irrit.2, H319 Calculation method Carc.
·Precautionary statement: P201 Obtain special instructions before use. P260 Do not breathe dust/mist. P273 Avoid release to the environment. P280 Wear protective gloves/ protective clothing/ eye protection/ face protection. P308 + P313 IF exposed or concerned: Get medical advice/attention. P391 Collect spillage. P403 + P233 Store in a well-ventilated place. Keep container tightly closed. ·Supplemental label elements: Restricted to industrial and professional uses. ·2.
Ingredients: Substance CAS No. Index EC No. No. w/w, CLP SCL/M-factor/A % Classification TE Carbon 7440-44-0 - 231-153-3 22.5 None - Steel 12597-69-2 - - 19 None - Copper 7440-50-8 - 231-159-6 7.2 None - Aluminum 7429-90-5 231-072-3 3.5 None - Dimethyl carbonate 616-38-6 210-478-4 3 607-01300-6 Flam. Liq. 2, H225 - Acute Tox. 4, H302 Ethylene carbonate 96-49-1 - 202-510-0 2.5 Eye Irrit.
4 - First Aid Measures ·4.1 Description of first aid measures General advice: IF exposed or concerned: Get medical advice/attention. After inhalation: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER/doctor/if you feel unwell. After skin contact: Take off immediately all contaminated clothing. Rinse skin with water/ shower. Immediately call a POISON CENTER or doctor/physician. After eye contact: Rinse cautiously with water for several minutes.
5 - Fire-Fighting Measures ·5.1 Extinguishing media ·Suitable extinguishing agents: Use chemical powder, sand, soil, alcohol resistant foam to extinguish. ·Unsuitable extinguishing media: Water. ·5.2 Special hazards arising from the substance or mixture: May produce corrosive dust/ mist. ·5.3 Advice for firefighters Protective equipment: Wear an approved positive pressure self-contained breathing apparatus (Comply with EN 133). 6 - Accidental Release Measures ·6.
·6.3 Methods and material for containment and cleaning up: Neutralize the liquid with alkali, then absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust). Do not use water flush. Ensure good ventilation. Dispose contaminated material as waste according to section 13. ·6.4 Reference to other sections: See section 7 for information on safe handing. See section 8 for information on personal protection equipment. See section 13 for disposal in formation.
8 - Exposure Controls / Personal Protection ·8.1 Control parameters ·Ingredients with limit values that require monitoring at the workplace: Country 1333-86-4 Limit value - Eight hours Limit value - Short term Carbon black 3.5 mg/m3 Belgium - mg/m3 7.0 mg/m3 Denmark 3.5 Finland 3.5 mg/m3 France 3.5 mg/m3 - 3.5 mg/m3 7 mg/m3 15 minutes reference 3.5 mg/m3 7 mg/m3 15 minutes reference period Ireland period Spain Sweden 3 United - mg/m3 3.5 - mg/m3 7.
·Personal protective equipment ·Eye and face protection: Safety glasses Protective goggles with side-shields. ·Skin protection ·Hand protection: Protective gloves Gloves made from butyl rubber Neoprene™ rubber, nitrile rubber (thickness> 0.3mm; breakthrough times up to 480 minutes). ·Other skin protection: Anti-acid gauntlets, boots, bodysuit are necessary. ·Respiration protection: Use positive pressure breathing mask if concentrations in air could exceed occupational exposure standard.
9 - Physical and Chemical Properties ·9.
·Oxidizing liquids Not applicable ·Oxidizing solids Not applicable ·Organic peroxides Not applicable ·Corrosive to metals Not applicable ·Desensitised explosives Not applicable ·9.2.
10 - Stability and Reactivity ·10.1 Reactivity: The product is non-reactive under normal conditions of use, storage and transport. ·10.2 Chemical stability: Under storage at normal ambient temperatures, the product is stable. ·10.3 Possibility of hazardous reactions: No known hazardous reaction. ·10.4 Conditions to avoid: High temperature and flame. ·10.5 Incompatible materials: Acid. ·10.
·Reproductive toxicity: Based on available data, the classification criteria are not met. ·Summary of evaluation of the CMR properties: Based on available data, the classification criteria are not met. ·STOT-single exposure: Based on available data, the classification criteria are not met. ·STOT-repeated exposure: Cause damage to organ through prolonged or repeated exposure. ·Aspiration hazard: Based on available data, the classification criteria are not met. 11.2 Information on other hazards 11.2.
13 - Disposal Considerations ·13.1 Waste treatment methods ·Recommendation: Must not be disposed together with household garbage. ·13.2 Un-cleaned packaging ·Recommendation: Dispose of contents/container in according to the local/regional/national/ international regulation. 14 - Transport Information ·IMO/IMDG (40-20) This product is not subject to IMO/IMDG code according to special provision 188. ·ADR/RID (2021 Edition) This product is not subject to ADR/RID according to special provision 188. ·14.
15 - Regulatory Information ·15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture ·MAK (German Maximum Workplace Concentration): 1333-86-4 Carbon black 3 ·Directive 2012/18/EU ·Named dangerous substances-ANNEX I: None of the ingredients is listed. ·Named dangerous substances-ANNEX I: H2 ACUTE TOXIC E1 Hazardous to the Aquatic Environment ·Seveso category: Not applicable ·Qualifying quantity (tonnes) for the application of lower-tier requirements: 50.
16 - Other Information ·16.1 Indication of changes: None. 16.2 Abbreviations and acronyms: ADR: Accord européen sur le transport des marchandises dangereuses par Route (European Agreement concerning the International Carriage of Dangerous Goods by Road). IMDG: International Maritime Code for Dangerous Goods. IATA: International Air Transport Association.
·16.5 Relevant H- and EUH-phrases (number and full text): H301 Toxic if swallowed H330 Toxic if swallowed H314 Causes severe skin burns and eye damage H317 May cause an allergic skin reaction H318 Causes serious eye damage H350 May cause cancer H372 Causes damage to organs through prolonged or repeated exposure H400 Very toxic to aquatic life H410 Very toxic to aquatic life with long lasting effects ·16.
声明 Statement 1.本检测报告首页所列信息中除样品来源、接样日期、检测日期、检测结果和检测结论外，均由委托方提供，委托方对样品 的代表性和 资料的真实性负责，本实验室不承担任何相关责任。 The information as listed on the first page of this test report was all provided by the client except the sample from, date received, test period, test results and test conclusion. The client shall be responsible for the representativeness of sample and authenticity of materials, for which EMTEK shall bear no responsibilities. 2.
签发测试报告条款 Conditions of Issuance of Test Reports 1. 东莞市信测科技有限公司（以下简称[本公司]）为提供符合下述条款的测试和报告，而接受有关样品和货品。本公 司基于下述条款提供服务，下述条款为本公司与申请服务的个人，企业或公司（以下简称[客户]）的协议。 All samples and goods are accepted by the EMTEK(Dongguan) Co., Ltd. (the “Company”) solely for testing and reporting in accordance with the following terms and conditions.
