Installation Guide

REQUIRED FOR ALL EXTERIOR INSTALLATIONS
• Hand Saw
• Utility Knife
• Tape Measure
• Caulking Gun for a 10 oz Tube
• 1.625” Non-Corrosive Deck Screws
• 2.50” Non Corrosive Deck Screw for Ledgers
• Sandpaper
• PL Adhesive (200 or 300 is recommended)
• Level
• Drill
• Screw Driver Bits
• Framing Square
• Marker
• Gloves
• Safety Goggles and Glasses
• Big Stretch White Caulking
RECOMMENDED FOR EXTERIOR INSTALLATIONS
• Tyvek HomeWrap
• Circular or Table Saw
• GenStone Color Match Caulking
• GenStone Paint Kits
REQUIRED FOR OVER BRICK, CONCRETE AND STUCCO
• Tyvek HomeWrap • Tapcon Fasteners
REQUIRED FOR INTERIOR OVER DRYWALL
• Hand Saw
• Utility Knife
• Tape Measure
• Caulking Gun for a 10 oz Tube
• 2” Drywall Screws
• Level
• Sandpaper
• Drill
• Screw Driver Bits
• Framing Square
• Marker
• Gloves
• Safety Goggles and Glasses
• Big Stretch White Caulking
NOTE: PL Adhesive or any other construction adhesive is not recommended for interior projects
RECOMMENDED FOR INTERIOR INSTALLATIONS
• GenStone Color Match Caulking • GenStone Paint Kits
PAINT KITS AND CAULKING
Color Match Caulking One tube for every 400 SQFT of GenStone installed
Big Stretch Caulking One tube for every 100 SQFT of GenStone installed
PL 3x Adhesive
One 10oz tube for every 100 SQFT or One 28oz tube for every 200 SQFT of GenStone
Paint Kits
One paint kit for every 400 SQFT of GenStone installed