Installation Guide

REQUIRED FOR ALL EXTERIOR INSTALLATIONS
• Hand Saw
• Utility Knife
• Tape Measure
• Caulking Gun for a 10 oz Tube
• 1.625” Non-Corrosive Deck Screws
• 2.50” Non Corrosive Deck Screw for Ledgers
• Sandpaper
• PL Adhesive (200 or 300 is recommended)
• Level
• Drill
• Screw Driver Bits
• Framing Square
• Marker
• Gloves
• Safety Goggles and Glasses
• Big Stretch White Caulking
RECOMMENDED FOR EXTERIOR INSTALLATIONS
• Tyvek HomeWrap
• Circular or Table Saw
• GenStone Color Match Caulking
• GenStone Paint Kits
REQUIRED FOR OVER BRICK, CONCRETE AND STUCCO
• Tyvek HomeWrap • Tapcon Fasteners
REQUIRED FOR INTERIOR OVER DRYWALL
• Hand Saw
• Utility Knife
• Tape Measure
• Caulking Gun for a 10 oz Tube
• 2” Drywall Screws
• Level
• Sandpaper
• Drill
• Screw Driver Bits
• Framing Square
• Marker
• Gloves
• Safety Goggles and Glasses
• Big Stretch White Caulking
PL Adhesive or any other construction adhesive is not recommended for interior projects
RECOMMENDED FOR INTERIOR INSTALLATIONS
• GenStone Color Match Caulking • GenStone Paint Kits
PAINT KITS AND CAULKING
• COLOR MATCH CAULKING: One for every 400 SQFT of GenStone installed
• BIG STRETCH WHITE CAULKING: One for every 100 SQFT of GenStone installed
• PAINT KITS: One for every 400 SQFT of GenStone and one for every color match caulking