Measurement Guide

HOW TO MEASURE
PROJECT PLANNING
3.13 SQFT of Coverage Per Panel
FULL PANEL
Include in Your Overall Measurements
COVERAGE AREA
Do Not Include in Your Overall Measurements
SHIPLAP AREA
EXAMPLE PROJECT DETAILS
• East Wall = 25 LF • South Wall = 40 LF
• 4’ Tall Wainscot • Ledger Finish
Stacked stone wainscot with ledgers
✓
25 x 12 + 40 x 12 = 780”
✓
780” ÷ 41” = 19.02 Panels Needed
✓
Always round up and add 5%
✓
19.02 x 1.05 = 19.97 or 20 Panels
4 Panels Tall + Ledger = 48” Wainscot
WAINSCOT
✓
19.02 x 4 = 76.08 Panels Needed
✓
Always Round Up to Be Safe!
23”
11”
6”
12”
23”
1”
11”
6”
12”
Inside Corner Panel
Outside Corner Panel
You can miter the full panel or use a
GenStone Inside or Outside corner to
transition through a 90º corner. This
project would require one outside corner.
OUTSIDE AND INSIDE CORNERS
✓
Each Corner Provides 18” of Width per Row
✓
Subtract One Full Panel for Every 3 Corners
We always recommend starting from a corner
and work either left or right from there. The
corner panels provide the necessary offset pattern
to keep seams from lining up. If you do not use
corners for your project, be sure to stagger the panels
as shown above.
TIPS FOR SUCCESS
✓
Corners are the Height of Two Panels Stacked
© GenStone Products • [e-mail] • 1-800-425-0788 • genstone.com
1”
41”
11”
1”
1”
41”
11”
1”
1”
41”
11”
1”
1”
41”
11”
1”
1”
1”
1”