User guide

Version 2.2

See section 2.2.2.1

*MUL

Modifies the multiplication factor (+ 8 characters)

Example :

*MUL1.00E+01 selects a multiplication factor of 10

*MUL10.00000 selects a multiplication factor of 10

USB only

*ADD

Modifies the offset factor (8 characters)

Example :

*OFF2.00E+02 selects a user offset of +200 watts

*OFF-200.000 selects a user offset of -200 watts

USB only

*ANE

Enable the anticipation (default)

See section 2.2.3.3.3

USB and

DB-15 connector

*AND

Disable the Anticipation

See section 2.2.3.3.3

USB and

DB-15 connector

*CVU

Stop the HP to send data automatically (push mode) and

returns a single measurement

Example :

*CVU

Pw= 0.0 Ti= 20.000 F= 0.000

USB only

Please note that you must type the exact number of characters or numerical values required and don’t put

any space between characters or numerical values.