Product Manual
Table Of Contents
- We are happy to double check your installation at no cost and offer any additional adjustment advice or tips. Simply email your pics to support@gentent.com, include your original GenTent.Com order number, or let us know the make and model of your gene...
- Product Registration
- If you purchased from www.gentent.com, your product is already registered. If you purchased from one of our partners, please visit www.gentent.com/register so that we can establish your purchase date and keep you informed of any periodic updates. IMP...
- Limited Three Year Warranty
- Package Contents
- Installation Overview
- Install GenTent Clamps on Generator Frame
- Install GenTent Frame on the GenTent Clamps
- Secure GenTent Canopy over GenTent Frame
- Important GenTent Usage Tips
- GenTent Accessories and Spare Parts Catalog
Page: 7 of 16
Copyright © 2013 GenTent Safety Canopies, LLC – All Rights Reserved V5 – July, 2013
Install GenTent Clamps on Generator Frame
1) Determine whether the Rubber Sleeve and/or Rubber Pads are
required
Your GenTent Clamp kit includes 4 rubber sleeve adapters and 8 sticky backed rubber
pads. Depending on the diameter, you will use one or both of these with your clamps.
Please see the following matrix:
A (1 inch)
B (1.25 inches)
C (1.5 inches)
Rubber Pads
Yes
No
Yes
Rubber Sleeve
Yes
Yes
No
If you do not know the diameter of your frame tubes, simply cut out the Frame
Diameter tool below and wrap it around the frame tube from right to left. As shown
below, the arrow will point to A, B, or C, which correspond with the letters above.
Simply match the letter and follow the recommendations for pads and/or sleeve.