Product Manual

Table Of Contents

Page: 13 of 24

Disassembling the Extender Arms

Complete disassembly of the Extender Arms between use or for storage is not necessary

and is not recommended. The Angle Braces and Extender Arms can stay installed

together for storage. Should you want to disassemble the Extender Arms, a flat head

screwdriver or similar flat edge tool is required.

a. Put the flat edge in the removal slot (Fig 2.5) on the top or bottom prong of the

Extender Arm that is to be removed.

b. Rotate the blade down toward the tip of the prong to disengage the pivot pin.

c. While rotating the flat edge blade to disengage the pin, push down or lift up on the

Extender Arm to allow it to come free.

Note

Follow the same steps to remove the Extender Arm from the Angle Brace.

Fig. 2.5

Removal

slot