Product Manual

Page: 13 of 20
Illustrations by Robert Ross, Fine Products, Inc. - All Rights Reserved - V20220101
WARNING
GenTent canopy must be installed above generator exhaust muffler. Install GenTent
electrical panel apron such that it cannot block exhaust in any way.
Refueling Door
The GenTent refueling door is designed to allow you to easily refuel your generator
without removing the GenTent. After use, the refueling door must be wrapped around
the side and pressed firmly back in place. Failure to reseal the door may allow water to
seep into the canopy. (Fig. 4.4)
Proper door sealing technique:
- Align the hook and loop at the bottom of the refueling door and press in place.
- Press the refueling door around the canopy and slide your hands to the bottom
while applying pressure to seal the door.
Clear Electrical Panel Apron (Option, Not Included)
The Clear Electrical Panel Apron is an optional alternative to the opaque electrical panel
apron that comes with your GenTent and is installed in the same way. For larger
generators, or generators with a longer electric panel, the clear and opaque aprons can
stack on top of each other to extend the panel coverage further down the generator.
NOTE
The intent of the Electrical Apron is to cover the electrical outlets in the front & wrap
around the adjacent sides to protect against sideways rain. Additional aprons should
never be wrapped around the generator while in use.
Fig. 4.3
Fig. 4.4