Installation Manual

Revision Date: 3/27/2011 Page: 17 of 21
EC Mirror Harness to Mirror Connector Pin-Out
Camera to EC Mirror Harness Connector Pin-Out
NO. GAUGE COLOR FUNCTION COLOR OF MATING
WIRE ON EC MIRROR
HARNESS
1 24 Red Camera (+) Power Green
2 24 Black Camera (-) Ground White
3 24 Brown Drain Yellow
4 24 White Video (-) Signal Black
5 24 Yellow Video (+) Signal Red
NO. GAUGE COLOR FUNCTION
1 24 Black Video (-) Signal
2 24 Red Video (+) Signal
3 22 Black Ground
4
5 22 Green Reverse
6 22 Red Ignition
7 24 Green Camera (+) Power
8 24 White Camera (-) Ground
9
10 22 Blue HomeLink (Ignition or Battery)
11
12
5
1
6
1
12
7
Troubleshooting
Auto-Dimming
Troubleshooting
START
Is green light illuminated?
Does mirror darken?
Mirror is functioning
properly.
YES
YES
Is the mirror receiving
+12 V?
Replace Harness
NO
VERIFY FUNCTION:
1. Cover forward-
facing photo cell.
2. Shine light (use a
ashlight) at rear-
facing photo cell.
NO
Replace Mirror
ENSURE:
1. EC mirror harness
power wire is
securely tapped
into OEM harness.
2. Ignition wire is
receiving +12 V.
3. Ground wire is
securely attached
to a vehicle ground.
YES
NO
STILL
NO
Make sure the car is
on and press the
“ ” button
(Power Button).
STILL NO