Installation Manual
Revision Date: 3/27/2011 Page: 18 of 21
Rear Camera Display
Troubleshooting
START
Is there live video feed
visible on the display screen?
Does Display turn o after
taken out of reverse?
Are there any “dead” pixels
(solid color dots or lines)
in the screen?
Does the mirror dim
while in reverse?
Mirror is functioning
properly.
YES
NO
YES
YES
Is there car ON and in reverse?
Is the mirror sending +6 V
& Ground to Camera?
Does the image appear
grainy or staticy?
Is the GREEN light illuminated?
Is the mirror receiving
+12 V from Ignition, +12 V from
Reverse signal, & proper
Ground?
Is the camera receiving
+6 V & Ground?
Turn Ignition ON
and put vehicle
in reverse.
ENSURE:
1. EC mirror harness
power wire is
securely tapped
into OEM harness.
2. Ignition and
Reverse wires are
receiving +12 V.
3. Ground wire is
securely attached
to a vehicle ground.
Replace Harness
& Camera
Is the ORANGE light illuminated?
Press and hold the
“ ” button for up to
6 seconds.
Replace Harness
Replace Mirror
Replace Harness
& Camera
NO
NO
NO
NO
NO
NO
YES
YES
YES
YES
YES
YES
NO
ENSURE:
1. EC mirror harness
power wire is
securely tapped
into OEM harness.
2. Ignition and
Reverse wires are
receiving +12 V.
3. Reverse wire is
receiving 0 V when
vehicle is NOT in
reverse.
3. Ground wire is
securely attached
to a vehicle ground.
NO
NO
YES
Replace Mirror
YES
STILL
NO
STILL NO