Installation Manual

Revision Date: 3/27/2011 Page: 4 of 21
3. Remove driver-side sun visor hook.
a) Remove screw in sun visor hook. Sun visor may also be removed if
more flex in headliner is desired. (Fig. 1-5)
4. Remove driver-side A-pillar trim.
a) Remove screws or grab handles if equipped.
b) Pull top of A-pillar trim towards passenger-side of vehicle. Once clips
are released, pull trim upwards towards roof of vehicle to remove trim.
(Fig. 1-6)
NOTE: Many vehicles are equipped with an A-pillar tether clip. All applications are
different and may require Needle-nose pliers to get in and twist the tether clip, ad-
ditional force to remove clip, or an additional screw removed, etc.
5. Remove driver-side scuff plate trim.
a) Using Panel Removal Tool, release clips and pull scuff plate upwards to
remove. (Fig. 1-7)
6. Remove driver-side kick plate trim.
a) Remove screws or hood release levers, if equipped.
b) Pull trim panel out towards passenger side of vehicle. (Fig. 1-8)
Fig. 1-5
Fig. 1-6
Fig. 1-7
Fig. 1-8