Installation Manual

Revision Date: 3/27/2011 Page: 5 of 21
7. Remove side dash trim.
a) Insert panel removal tool in between side dash trim panel and lower
dash panel to release clips.
b) Once clips are partially released, pull trim panel outwards to remove.
(Fig. 1-9)
8. Remove lower dash trim.
a) Remove screws in lower portion of trim.
b) Pull panel outwards, toward the rear of the vehicle in order to release
the clips.
c) Remove all connectors that are clipped into the lower dash trim panel
before completely removing.
d) Finish removing trim panel by continuing to pull outwards. (Fig. 1-10)
NOTE: For SUV’s you may be able to route the video portion of the EC mirror har-
ness through the headliner. In this case, skip to step 11.
9. Remove rear scuff plate trim on the driver-side of vehicle.
a) Using Panel Removal Tool, release clips and pull scuff plate upwards to
remove. (Fig. 1-11)
10. Partially remove rear door seal on the driver-side of vehicle.
a) Pull door seal back past scuff plate, bottom of B-pillar, and rear quarter
panel trim. (Fig. 1-12)
Fig. 1-9
Fig. 1-10
Fig. 1-11
Fig. 1-12