User's Manual

Suggested Owners Manual Text for Gentex Auto-Dimming Mirror with RCD, Z-Nav
®
, and HomeLink
®
Rear Camera Display (RCD)
The Auto-Dimming Rearview Mirror in your vehicle is also equipped with a Rear
Camera Display that shows a real-time panoramic view of the rear of the vehicle*. The
display appears through the driver’s side mirror glass automatically when the vehicle is
shifted into “reverse” and disappears when the vehicle is shifted into any other gear.
The display is supplied video by one or more cameras located at the rear of the vehicle.
RCD Function
The Rear Camera Display can be temporarily turned ON and OFF and will return to the
ON state when the ignition is cycled. Turning the display feature ON/OFF is only
available in Reverse:
1. Press and release the button to turn the display feature OFF.
2. Press and release the
button again to turn the display back ON.
The Rear Camera Display will turn off automatically after being continuously ON for
approximately 5 minutes.
Notes:
• Please note that the video display mirror is intended to be used as a supplemental
device for drivers and does not eliminate the need to check rearview mirrors or walk
around the vehicle, should conditions warrant.
• The RCD mirror defaults to the "ON" state each time the vehicle is started.
Z-Nav
®
Compass Display
The mirror in your vehicle is also equipped with a Z-Nav™ Compass that shows the
vehicle Compass heading in the Display Window using the 8 basic cardinal headings
(N, NE, E, SE, etc.).
Compass Function
The Compass can be turned ON and OFF and will remember the last state when the
ignition is cycled. Additionally the Compass can be set to compensate for Magnetic
Zones changes and be forced to Re-Calibrate if required.
To turn the display feature ON/OFF:
1. Press and release the
button to turn the display feature OFF.
2. Press and release the button again to turn the display back ON.
There is a difference between magnetic north and true north. The compass in the
mirror can compensate for this difference when it knows the Magnetic Zone in which it is
operating. This is set either by the dealer or by the user. The operating Zone Numbers
for North America are shown in the figure below.