Instructions / Assembly

Product Data Sheet 03/19/2014
All Purpose Primer II LVOC
GenTite™ RRS
250 West 96
th
Street
Indianapolis, IN 46260
800-443-4272 ● www.GenTite.com
Page 1 of 2
ISO-9000-2014
PDS#1445
Description
All Purpose Primer II LOVC is a solvent based primer designed to clean and prime Rubber Roofing (Black), Rubber
Roofing (White) and TPO Roofing applications to receive tape products/accessories where allowed by GenTite
specifications and in accordance with state regulations. All Purpose Primer II LOVC does not exceed 250 grams per
liter, and can be used in air quality management districts with VOC limits of 250 grams per liter. Verify that local and
state regulations allow the use of the solvents used in All Purpose Primer II LOVC in the given area independent of
VOC regulations.
Installation
Mix thoroughly before and during use. Product will appear uniform after mixing.
Splice surfaces must be clean, dry and free of foreign materials and excess dusting agent. Clean with broom or rags
to remove contaminates.
Apply All Purpose Primer II LOVC at the coverage specified to the splicing surfaces using the scrub pad and handle.
Use back and forth strokes (four minimum) with heavy pressure along the length of the splicing area, until membrane
surfaces become uniform in color, with no streaks or puddles. Additional scrubbing is required where the substrate is
contaminated.
Bear down on the scrub pad and handle system during application so the pad holder flattens to allow the total surface
of the pad to contact with the substrate to receive All Purpose Primer II LOVC.
Allow the surfaces to dry completely before applying Peel & Stick™ products. Use touch-push test to determine
readiness. Dry time will vary due to ambient conditions. Complete seaming procedures per GenTite current
specifications and details.
Product Data
SIZE
CONTENTS
PRODUCT #
1 gallon (3.8 liter)
4 cans per carton
W59GT30128
1 quart (0.94 liter)
6 quarts per carton
W59GT30129
Storage
Keep the material out of direct sunlight until ready for immediate application.
Shelf Life
Shelf life of 12 months can be expected if stored in original unopened container at temperatures between
60 °F to 80 °F (16 °C to 27 °C). Shelf life will be shortened if exposed to elevated temperatures.