Manual

50
Last updated before – displays when the last scan was
performed.
The results of the Site Survey test are converted to handy two graphs: AP count and RSSI. An
administrator can use this to identify the best channel for device operation that will not receive
interference from adjacent APs.
7.5.3 Delayed Reboot
This tool is extremely useful while tuning radio settings – once you defined hypothetic radio
parameters and set them with Apply button (not written to the permanent memory), device starts
Operating with the new settings, and in case the link fails, device will be rebooted in specified minutes,
thus the old settings will be set back.
Reboot after – specify time in minutes, after which the device will be rebooted.
Start/Stop – click to start or stop delayed reboot tool.
7.5.4 Ping
This command is used to test whether a particular host is reachable across an IP network. The Ping
results will be displayed graphically: