Zoom3D_usermanual

General description of the system - 23
Top Center: it’s measured the point finding on the center of the top edge of the target.
Top Right: it’s measured the point finding on the corner top right of the target.
Center Left: it’s measured the point finding on the external left edge of the target.
Center: it’s measured the center of the target.
Center Right: it’s measured the point finding on the external right edge of the target.
Bottom Left: it’s measured the point finding on the corner bottom left of the target.
Bottom Center: it’s measured the point finding on the center of the bottom edge of the
target.
Bottom Right: it’s measured the point finding on the corner bottom right of the target.
The direction to be considered to understand what is on the right and on the left is the one from target
toward the Zoom3D.
With the offset on target options it’s possible to measure easily elements that otherwise would be
hardly measurable such as corners, angles, etc.
Zoom3D direction control
To access to the control window of the Zoom3D direction use the button located on the side control
panel:
Type of target is laser spot
Type of target is target; Press the button Target.