Zoom3D_usermanual

38 - Delete objects
1. Select the operation Vertical plane on SmartDrawing.
To return to standard mode, select the operation Horizontal plane on SmartDrawing.
Measuring a point and saving the photo
It’s possible to measure a point and at the same time acquire a photo identifying the measured point.
1. Select the operation Take photo on SmartDrawing.
2. Measure the point
3. Photos can be visualized and managed by command Photo of the main menu.
Delete objects
1. Select the element to delete from the graphic window
2. Press the button Delete.
When it’s deleted an element as a line, this determine the deletion also of the points linked to the
object if these are not common to other objects.
Editing utilities
For the lines there are available some commands allowing to create new points and new lines starting
by the existing objects.
Inserting a point on a line
1. Select a line from the graphic window
2. Press the button Insert
3. Measure the new point with or select an existing point.
Calculation of intersections
This command calculates the point of intersection between two lines.
1. Select a line from the graphic window
2. Press the button Tools
3. Select the item Intersection
4. Select the line to intersect
5. It’s calculated the point of intersection between the two lines
6. Press Accept to save the point
Calculation of a new parallel line
This command creates a new parallel line to the selected line.
1. Select a line from the graphic window
2. Press the button Tools
3. Select the item Offset
4. Specify the direction and the offset value
5. It’s visualized the calculated parallel line