Zoom3D_usermanual
40 - Rectangles recognition
Vertical line: it’s determined and measured the intersection point between
two walls.
Bottom corner: it’s determined and measured the lower edge resulting by
the intersection of two walls and the pavement.
After having selected the edge measuring mode, collimate in rough manner the edge to measure and
press ; XPAD 3D will perform some measures to determine the position of the desired point and
will perform the measure.
The operation Cancel mode after measure allows to return to the standard measure mode after
completing the edge measure.
Rectangles recognition
When the view of the camera is active, XPAD 3D tries to locate rectangular elements among the
framed objects; every rectangular object identified it’s visualized with a blue dashed frame. It’s possible
to select one or more rectangles directly by the view of the camera and proceed directly at the measure
with .
XPAD 3D measures automatically the 4 vertexes of the rectangle and builds a closed polyline.
To activate and deactivate the automatic recognition of rectangles use the command Rectangles
recognition on SmartDrawing.
Frontal visualization referring to a line
1. Select a line
2. Press the button Front view; The view is rotated keeping the camera in front of the line and
providing so an elevation.
Visualization of data and results
When you select an element in the graphic view, are visualized several numeric information
representing it.
Information is different basing on the type of object. With the function calculator it’s possible to save
the values or to use them in calculations combining them to other values.
Line - Horizontal length
Line – Sloped length (3D)