Product Manual
Table Of Contents
- 1 Safety Directions
- 2 Description of the System
- 3 User Interface
- 4 Operation
- 4.1 Main Menu
- 4.2 System Information
- 4.3 Setting Up the TPS Instrument
- 4.4 Setting up for Remote Control (with the RadioHandle)
- 4.5 Connecting to a Personal Computer
- 4.6 Power Functions
- 4.7 Batteries
- 4.8 Working with the Memory Device
- 4.9 Working with Bluetooth
- 4.10 LED Indicators
- 4.11 Guidelines for Correct Results
- 5 Settings
- 6 Apps
- 7 Care and Transport
- 8 Technical Data
- 8.1 Angle Measurement
- 8.2 Distance Measurement with Reflectors
- 8.3 Distance Measurement without Reflectors
- 8.4 Distance Measurement - Long Range (LO mode)
- 8.5 Automatic Prism Aiming AiM
- 8.6 Prism Search (Scout) - only available at Zoom90
- 8.7 Conformity to National Regulations
- 8.8 General Technical Data of the Product
- 8.9 Scale Correction
- 8.10 Reduction Formulas
- 9 Software Licence Agreement
- 10 Glossary
- Appendix A Menu Tree
- Appendix B Directory Structure
- Appendix C Pin Assignments
Key Function
Starts the edit mode for editable fields.
Opens a selectable list.
User key User key is not used by GeoMax Toolkit.
Page key Displays the next screen when several screens are available.
FNC Used for key combinations.
•
<FNC>+<0> to toggle keyboard illumination.
•
<FNC>+<.> to go to the digital level.
Navigation key Controls the focus bar within the screen and the entry bar
within a field.
3.2 Softkeys
Softkeys are selected using the relevant F1 to F6 function keys. This chapter describes the
functionality of the common softkeys used by the system.
The more specialised softkeys are described where they appear in the program chapters.
Key Description
BACK To return to the last active screen.
OK If entry screen: Confirms measured or entered values and
continues the process.
If message screen: Confirms message and continues with
selected action or returns to the previous screen to reselect
an option.
DEFAULT To reset all editable fields to their default values.
RETRY To start a routine again.
CONF To start the configuration mode of a function.
3.3 Operating Principles
The user interface is operated either by the keyboard or by the touch screen with supplied
stylus. The workflow is the same for keyboard and touch screen entry, the only difference lies in
the way information is selected and entered.
Operation by keyboard
Information is selected and entered using the keys. Refer to "3.1 Keyboard" for a detailed
description of the keys on the keyboard and their function.
Operation by touch screen
Information is selected and entered on the screen using the supplied stylus.
Operation Description
To select an item Tap on the item.
To start the edit mode in editable fields Tap on the editable field.
Description
Common softkey
functions
Keyboard and touch
screen
User Interface 27