Product Manual
Table Of Contents
- 1 Safety Directions
- 2 Description of the System
- 3 User Interface
- 4 Operation
- 4.1 Main Menu
- 4.2 System Information
- 4.3 Setting Up the TPS Instrument
- 4.4 Setting up for Remote Control (with the RadioHandle)
- 4.5 Connecting to a Personal Computer
- 4.6 Power Functions
- 4.7 Batteries
- 4.8 Working with the Memory Device
- 4.9 Working with Bluetooth
- 4.10 LED Indicators
- 4.11 Guidelines for Correct Results
- 5 Settings
- 6 Apps
- 7 Care and Transport
- 8 Technical Data
- 8.1 Angle Measurement
- 8.2 Distance Measurement with Reflectors
- 8.3 Distance Measurement without Reflectors
- 8.4 Distance Measurement - Long Range (LO mode)
- 8.5 Automatic Prism Aiming AiM
- 8.6 Prism Search (Scout) - only available at Zoom90
- 8.7 Conformity to National Regulations
- 8.8 General Technical Data of the Product
- 8.9 Scale Correction
- 8.10 Reduction Formulas
- 9 Software Licence Agreement
- 10 Glossary
- Appendix A Menu Tree
- Appendix B Directory Structure
- Appendix C Pin Assignments
4.4 Setting up for Remote Control (with the RadioHandle)
a
b
c
9856_002
a
b
d
f
g
e
a Prism
b Prism pole
c Field controller with Bluetooth
d Holder
e RadioHandle
f Instrument
g Tripod
4.5 Connecting to a Personal Computer
Microsoft ActiveSync (for PCs with Windows XP operating system) or Windows Mobile Device
Center (for PCs with Windows Vista or Windows 7/Windows 8/Windows 10 operating system) is
the synchronisation software for Windows mobile-based pocket PCs. Microsoft ActiveSync or
Windows Mobile Device Center enables a PC and a Windows mobile-based pocket PC to commu-
nicate.
1. Start the computer.
2. Download the GeoMax Zoom70/90 USB driver from the GeoMax download page.
3. Run the Setup_GeoMax_USB_xx.exe to install the drivers necessary for GeoMax
Zoom70/90. Depending on the version (32 bit or 64 bit) of the operating system on
your computer, you have to select between the three setup files following:
•
_USB_32bit.exe
•
_USB_64bit.exe
•
_USB_64bit_itanium.exe
4. The InstallShield Wizard window appears.
☞
Ensure that all GeoMax devices are disconnected from your computer
before you continue!
5. Click Next>.
The Ready to Install the Program window appears.
6. Install. The drivers are installed on your computer.
☞
For computers with Windows Vista or Windows 7/Windows 8/
Windows 10 operating system: If not already installed, Windows Mobile
Device Center is installed additionally.
7. The InstallShield Wizard Completed window appears.
8. Check I have read the instructions and click Finish to exit the wizard.
Setup for remote control
with the RadioHandle
☞
Install GeoMax
Zoom70/90 USB drivers
32 Operation