Product Manual
Table Of Contents
- 1 Safety Directions
- 2 Description of the System
- 3 User Interface
- 4 Operation
- 4.1 Main Menu
- 4.2 System Information
- 4.3 Setting Up the TPS Instrument
- 4.4 Setting up for Remote Control (with the RadioHandle)
- 4.5 Connecting to a Personal Computer
- 4.6 Power Functions
- 4.7 Batteries
- 4.8 Working with the Memory Device
- 4.9 Working with Bluetooth
- 4.10 LED Indicators
- 4.11 Guidelines for Correct Results
- 5 Settings
- 6 Apps
- 7 Care and Transport
- 8 Technical Data
- 8.1 Angle Measurement
- 8.2 Distance Measurement with Reflectors
- 8.3 Distance Measurement without Reflectors
- 8.4 Distance Measurement - Long Range (LO mode)
- 8.5 Automatic Prism Aiming AiM
- 8.6 Prism Search (Scout) - only available at Zoom90
- 8.7 Conformity to National Regulations
- 8.8 General Technical Data of the Product
- 8.9 Scale Correction
- 8.10 Reduction Formulas
- 9 Software Licence Agreement
- 10 Glossary
- Appendix A Menu Tree
- Appendix B Directory Structure
- Appendix C Pin Assignments
4.7 Batteries
4.7.1 Operating Principles
•
The battery must be charged before using it for the first time because it is delivered with an
energy content as low as possible.
•
The permissible environment is only indoor conditional and temperature range for charging
is between 0 °C to +40 °C/+32 °F to +104 °F. For optimal charging, we recommend charg-
ing the batteries at a low ambient temperature of +10 °C to +20 °C/+50 °F to +68 °F if
possible.
•
It is normal for the battery to become warm during charging. Using the chargers recom-
mended by GeoMax, it is not possible to charge the battery once the temperature is too
high.
•
For new batteries or batteries that have been stored for a long time (> three months), it is
effectual to make only one charge/discharge cycle.
•
For Li-Ion batteries, a single discharging and charging cycle is sufficient. We recommend
carrying out the process when the battery capacity indicated on the charger or on a
GeoMax product deviates significantly from the actual battery capacity available.
•
The batteries can be operated from −20 °C to +55 °C/−4 °F to +131 °F.
•
Low operating temperatures reduce the capacity that can be drawn; high operating temper-
atures reduce the service life of the battery.
4.7.2 Battery for the Zoom70/90 Instrument
009857_001
3
5
4
2
6
1
7
1. Face the instrument so that the vertical drive screw is on the left. The battery com-
partment is below the vertical drive. Turn the knob to the vertical position, opening
the lid of the battery compartment.
2. Pull out the battery housing.
3. Pull the battery from the battery housing.
4. A pictogram of the battery is displayed inside the battery housing. This pictogram is
a visual aid to help with placing the battery correctly.
5. Place the battery into the battery housing, ensuring that the contacts are facing out-
ward. Click the battery into position.
6. Place the battery housing into the battery compartment. Push the battery housing in
until it fits completely into the battery compartment.
7. Turn the knob to lock the battery compartment. Ensure that the knob is returned to
its original horizontal position.
4.8 Working with the Memory Device
•
Keep the card dry.
•
Use it only within the specified temperature range.
•
Do not bend the card.
•
Protect the card from direct impacts.
Failure to follow these instructions could result in data loss and/or permanent damage to the
card.
First-time use/
charging batteries
Operation/
discharging
Change battery
step-by-step
☞
☞
Operation 35