Item Brochure

specifications
Applications
MD360R Remote Display
• Clear remote display panel mounts to the wind-
shield with a heavy-duty suction cup or magnetically
to the cab or window frame. Won’t block operator’s
view.
• Displays the 5 channels of the receiver, plus the ver-
tical indicator arrows. It receives the information via
wireless RF link (no cable needed).
• Plugs into the cigarette lighter (accessory plug) in
the cab.
ADVANTAGES:
• as soon as you turn on the MD360R the commu-
nication with the receiver is detected
• the remote display is dedicated to the receiver; no
problem of frequency interferences
• you can turn off the receiver from the remote
display in the cabin: saving battery life.
Carrying case includes
• MR360R rechargeable receiver
with magnet or clamp mount
• 110/240V charger for MR360R
• MD360R remote display
• suction cup (for MD360R mount)
• user manual
* Range and accuracy vary with laser used.
9 3/4" (25 cm) capture height
Graphic Design [phone] -
Print R2N 01 39 57 00 23 - Non contractual photographs - Specifications subject to change without notice - 2005 -
MR360R Specifications
Operating distance* 650 ft. (200 m)
Reception 360°
Capture window 9.75" (25 cm)
Accuracy* Fine: ±1/8"-1/2" (3-12mm)
Coarse: ±3/16"-1" (5-25mm)
Vertical indicator +/- 5°
Waterproof IP67
Charging time 16 hours
Battery life 40h (depends of the using mode)
Power Battery rechargeable Ni-Cad
Frequency range 100' (30 m) between MR360R and MD360R
Size 14.75" x 3" x 4.25" (37.5 x 7.5 x 10.7 cm);
4 lbs. (1.8 kg) without clamps
The MR360R offers accurate grade
information for all visual machine
control applications. Large 360° detec-
tion windows pick up any rotating
laser, from any angle.
Built-in vertical indicator monitors
angle of the stick, signaling if it's plumb
or under- or overextended. Vertical
position ensures consistent and accu-
rate grade readings, saving money by
reducing over- or under-cutting.
Two models are available: MR360R
with heavy-duty clamps and
MR360RA with large magnets
for quick mount and easy
movement from machine to
machine.
MR360R 360° Machine mounted receiver
FEATURES
• 5 LED indicators show position of
the bucket or blade in relation to
laser beam.
• Vertical indicator LED on receiver
blinks if dipper stick is not plumb. LED
arrows on remote display indicate
which way to move to straighten the
stick.
• Memory function stores the last
signal received. Arrows indicate if
the beam is high or low, allowing you
to quickly reach the reference plane.
• Rugged, waterproof construction.
Built-in shock mounts minimize
machine vibrations.
• Selectable accuracy (fine and coarse).
AGATEC Construction Lasers - Div. of AGL
2202 Redmond Rd.- Jacksonville, AR 72076
Phone: [phone] - Fax: [phone]
[e-mail] - www.agatec.com
MR360R can be purchased without remote. For optimal use of
vertical indicator, the remote with direction arrows is required.
Vertical
indicator