Product Manual
Table Of Contents
- Introduction
- Table of Contents
- 1 General Information
- 2 How to Use the Locator
- 3 How to Use the Transmitter
- 4 How to Use the Conductive Rod
- 5 How to Use the Signal Clamp
- 6 How to Use the Property Connection Set
- 7 How to Use the Sonde
- 8 Care and Transport
- 9 Safety Directions
- 10 Technical Data
- 11 International Limited Warranty
- Appendix A Functional Checks
- Appendix B World Frequency Zones
- Index
102EZiSYSTEM, Functional Checks
2. Audio / Visual display test
Turn on the Transmitter. All LED's will illuminate and the speaker will emit a tone. All LEDs
must be operative and an audible output must be heard.
3. Battery check
The battery indicator flashes to indicate a poor battery condition. Replace all batteries with
four new LR20 (D) type alkaline batteries, or remove and recharge the battery pack if
rechargeable batteries are fitted.