Product Manual
Table Of Contents
- Introduction
- Table of Contents
- 1 General Information
- 2 How to Use the Locator
- 3 How to Use the Transmitter
- 4 How to Use the Conductive Rod
- 5 How to Use the Signal Clamp
- 6 How to Use the Property Connection Set
- 7 How to Use the Sonde
- 8 Care and Transport
- 9 Safety Directions
- 10 Technical Data
- 11 International Limited Warranty
- Appendix A Functional Checks
- Appendix B World Frequency Zones
- Index
EZiSYSTEM, Functional Checks 105
Functional test check list
Functional Test Check List
Unit:
Transmitter...
Serial Number: Comments:
Test Operative Fail analysis Notes
Yes No N/A
1. Casing
Return for repair/
Replace
Casing should be free of
damage.
2. Labels
Return for repair/
Replace
Body labels must be legible
and intact. Display label
must be free of damage and
tears.
3. Battery cover and
accessory cover
Return for repair/
Replace
Hatches must lock into place.
4. Battery contacts Return for repair Contacts must be free of
corrosion.
5. Audio / Visual
display test
Return for repair All LEDs must illuminate and
an audible output must be
heard.
6. Batteries Replace Replace alkaline batteries if
exhausted (no response) or if
the battery indicator light is
illuminated or flashing after
display test.
Replace all batteries!