Product Manual
Table Of Contents
- Introduction
- Table of Contents
- 1 General Information
- 2 How to Use the Locator
- 3 How to Use the Transmitter
- 4 How to Use the Conductive Rod
- 5 How to Use the Signal Clamp
- 6 How to Use the Property Connection Set
- 7 How to Use the Sonde
- 8 Care and Transport
- 9 Safety Directions
- 10 Technical Data
- 11 International Limited Warranty
- Appendix A Functional Checks
- Appendix B World Frequency Zones
- Index
EZiSYSTEM, Functional Checks 111
Functional test check list
Functional Test Check List
Unit:
Sonde...
Serial Number: Comments:
Test Operative Fail analysis Notes
Yes No N/A
1. Casing
Fail Casing should be free of
damage.
2. Screw thread and
seal
Fail Screw thread must be intact
and seal in place.
3. Battery contacts Fail Contacts must be free of corro-
sion.
4. 33 kHz mode Fail LED must be illuminated
brightly and pulse fast. Locator
must provide maximum
display at 2 metres.
5. 8 kHz mode Fail LED must be illuminated
brightly and pulse slowly.
Locator must provide
maximum display at 2 metres.
Tested by: Date: