Product Manual
Table Of Contents
- Introduction
- Table of Contents
- 1 General Information
- 2 How to Use the Locator
- 3 How to Use the Transmitter
- 4 How to Use the Conductive Rod
- 5 How to Use the Signal Clamp
- 6 How to Use the Property Connection Set
- 7 How to Use the Sonde
- 8 Care and Transport
- 9 Safety Directions
- 10 Technical Data
- 11 International Limited Warranty
- Appendix A Functional Checks
- Appendix B World Frequency Zones
- Index
EZiSYSTEM, How to Use the Locator 21
2.5 How to Locate a Service
Start up test The following test sequence will take place every time the Locator is activated.
GPS Search Mode (i700, i750 & i750xf)
A GPS search mode is activated as part of the start up test allowing the internal GPS
module time to search for a GPS position. GPS search mode is active following the start up
test even if the locator is off, the search mode will stop when a GPS position is obtained or
a 12 minute search period has elapsed.
GPS search mode does not affect the locators performance and the locator can be used as
normal throughout this search mode.
On test Test pattern Info on label
Audio Output On throughout test
sequence
Signal Strength indi-
cator
Scrolls through in
sequence once
Mode indicators Briefly illuminated
Indicator Icons Briefly illuminated
Battery indicator On throughout test
sequence