Product Manual
Table Of Contents
- Introduction
- Table of Contents
- 1 General Information
- 2 How to Use the Locator
- 3 How to Use the Transmitter
- 4 How to Use the Conductive Rod
- 5 How to Use the Signal Clamp
- 6 How to Use the Property Connection Set
- 7 How to Use the Sonde
- 8 Care and Transport
- 9 Safety Directions
- 10 Technical Data
- 11 International Limited Warranty
- Appendix A Functional Checks
- Appendix B World Frequency Zones
- Index
EZiSYSTEM, How to Use the Locator 33
Taking a Current Measurement
1. Apply a signal to the service.
Refer to "3 How to Use the
Transmitter" for more informa-
tion.
2. Select the mode to suit the
transmitters output. Position
the Locator directly over, and
at 90 degrees to the direction of
the service.
3. Press and release the i Button.
4. The display readout will indi-
cate the depth of the service
and the Line mode icon will be
displayed.
5. The display readout will then
indicate the Current Reading.
i
F
i
1
2 3
4 5