Product Manual
Table Of Contents
- Introduction
- Table of Contents
- 1 General Information
- 2 How to Use the Locator
- 3 How to Use the Transmitter
- 4 How to Use the Conductive Rod
- 5 How to Use the Signal Clamp
- 6 How to Use the Property Connection Set
- 7 How to Use the Sonde
- 8 Care and Transport
- 9 Safety Directions
- 10 Technical Data
- 11 International Limited Warranty
- Appendix A Functional Checks
- Appendix B World Frequency Zones
- Index
34EZiSYSTEM, How to Use the Locator
2.6 Wireless Data Communication, where applicable
Bluetooth Bluetooth status is indicated on the locators display, the Bluetooth symbol will be illumi-
nated when Bluetooth connectivity is available. Data can be wirelessly transferred from a
Bluetooth enabled Locator to a suitable data logging device, enabling the operator to
capture information about the Locator’s status and the service depth. When the Locator is
paired to a suitable device, the Bluetooth symbol will flash, and the unit will transmit data
periodically.
Important information for pairing:
• The Locator must be switched on throughout the process
• Follow the instructions on the device for pairing. Refer to the manufacturer’s
instructions.
Pairing information
• The Bluetooth symbol will flash continually when the devices have successfully paired.
• When a depth reading has been taken, the Locator will display LOG. To transfer the
information to the data logger press the i Button whilst LOG is displayed.
• Whilst the Locator is calculating depth the data output stops.
• If there is no wireless communication then the LOG function will not be displayed and
the unit will function as a Locator.
• The Locator will output ASCII text.
Refer to "ASCII text description" for more information.
Locator Name: ‘Model Number’ - ‘Serial Number’
for example: 550-000001
Pass key: 12345