Product Manual
Table Of Contents
- Introduction
- Table of Contents
- 1 General Information
- 2 How to Use the Locator
- 3 How to Use the Transmitter
- 4 How to Use the Conductive Rod
- 5 How to Use the Signal Clamp
- 6 How to Use the Property Connection Set
- 7 How to Use the Sonde
- 8 Care and Transport
- 9 Safety Directions
- 10 Technical Data
- 11 International Limited Warranty
- Appendix A Functional Checks
- Appendix B World Frequency Zones
- Index
36EZiSYSTEM, How to Use the Locator
Data output Range Example value Description
DV 000 to 999 550 Model identifier
SN 000000 to 999999 123456 Serial number
SV 0.00 to 9.99 3.01 Software version
TM 00:00 to 23:59 08:30 Time: hh:mm
(default = 00:00; no RTC fitted)
DT 00/00/00 to 31/12/99 01/12/10 Date: dd/mm/yy
(default = 00/00/00; no RTC fitted)
CM 00 to 15 12 Number of months until next
calibration (00 to 15)
ST 0 or 1 0 Self test: 0 = Pass, 1 = Fail
BT 0 to 9 7 Battery level: 0 = Empty, 9 = Good
MD 0 to 6 3 Mode: 0 = Power, 1 = Radio,
2=8kHz, 3=33kHz, 4=Auto,
5 = 512 Hz, 6 = 640 Hz
SS 01 to 48 16 Signal strength: 01 to 48
UM M or I M Units of measurements:
M or I (Metres or Imperial)
DP 0.30 to 3.00 or --- 125 Depth value displayed depends on
value for UM.