Product Manual
Table Of Contents
- Introduction
- Table of Contents
- 1 General Information
- 2 How to Use the Locator
- 3 How to Use the Transmitter
- 4 How to Use the Conductive Rod
- 5 How to Use the Signal Clamp
- 6 How to Use the Property Connection Set
- 7 How to Use the Sonde
- 8 Care and Transport
- 9 Safety Directions
- 10 Technical Data
- 11 International Limited Warranty
- Appendix A Functional Checks
- Appendix B World Frequency Zones
- Index
48EZiSYSTEM, How to Use the Transmitter
Danger Connecting the cable set to a live service can result in an electric shock.
Precautions:
The connection cable set should never be connected directly to a live service.
Warning The transmitter is capable of outputting potentially lethal voltages.
Precautions:
Care should be taken when handling exposed or non-insulated connections including;
the connection cables sets, the Earth Pin and the connection to the service.
Notify others who may be working on or around the service.
Warning The transmitter is capable of outputting potentially lethal voltages.
Precautions:
Care should be taken when using the maximum power output level.
• Ensure there are no services below the ground when using the Earth Pin. Use the
Locator in advance.
• The black cable can be connected to other metallic structures which go into the ground.
• In dry conditions it may be necessary to add water around the earth point to get a good
connection.
• Examine connection points and remove contamination if a continuous audible output is
not achieved.
• An extension cable is available to extend the red or black cable sets.