Product Manual
Table Of Contents
- Introduction
- Table of Contents
- 1 General Information
- 2 How to Use the Locator
- 3 How to Use the Transmitter
- 4 How to Use the Conductive Rod
- 5 How to Use the Signal Clamp
- 6 How to Use the Property Connection Set
- 7 How to Use the Sonde
- 8 Care and Transport
- 9 Safety Directions
- 10 Technical Data
- 11 International Limited Warranty
- Appendix A Functional Checks
- Appendix B World Frequency Zones
- Index
66EZiSYSTEM, Safety Directions
EN
• Use of products with obviously recognizable damages or defects.
• Use with accessories from other manufacturers without the prior explicit approval of
Cable Detection.
• Inadequate safeguards at the surveying site, for example when measuring on roads.
Warning Adverse use can lead to injury, malfunction and damage. It is the task of the person respon-
sible for the equipment to inform the user about hazards and how to counteract them. The
product is not to be operated until the user has been instructed on how to work with it.
9.3 Limits of Use
Environment Suitable for use in an atmosphere appropriate for permanent human habitation: not suit-
able for use in aggressive or explosive environments.
Danger Local safety authorities and safety experts must be contacted before working in hazardous
areas, or in close proximity to electrical installations or similar situations by the person in
charge of the product.
9.4 Responsibilities
Manufacturer of the
product
Cable Detection Ltd, Staffordshire, UK, hereinafter referred to as Cable Detection, is respon-
sible for supplying the product, including the user manual and original accessories, in a
completely safe condition.
Manufacturers of non
Cable Detection accesso-
ries
The manufacturers of non Cable Detection accessories for the product are responsible for
developing, implementing and communicating safety concepts for their products, and are
also responsible for the effectiveness of those safety concepts in combination with the
Cable Detection product.