Product Manual
Table Of Contents
- Introduction
- Table of Contents
- 1 General Information
- 2 How to Use the Locator
- 3 How to Use the Transmitter
- 4 How to Use the Conductive Rod
- 5 How to Use the Signal Clamp
- 6 How to Use the Property Connection Set
- 7 How to Use the Sonde
- 8 Care and Transport
- 9 Safety Directions
- 10 Technical Data
- 11 International Limited Warranty
- Appendix A Functional Checks
- Appendix B World Frequency Zones
- Index
EZiSYSTEM, General Information 7
1 General Information
1.1 How to Use this Manual
It is recommended to set up the product while reading through this manual.
Naming convention EZiCAT i500, i550, i600, i650, i700, i750 and xf models are hereinafter referred to as Locator.
Differences between the models are marked and described.
EZiTEX t100, t300 and xf models is hereinafter referred to as Transmitter.
EZiROD is hereinafter referred to as Conductive Rod.
Index The index is at the back of the manual.
Instrument label On the Locator and Transmitter you will find a label that shows some important informa-
tion by means of illustrations. You will find some of these illustrations in this manual too.
This should help to get a clear connection between the instrument label and the informa-
tion in this manual.