Product Manual
Table Of Contents
- Introduction
- Table of Contents
- 1 General Information
- 2 How to Use the Locator
- 3 How to Use the Transmitter
- 4 How to Use the Conductive Rod
- 5 How to Use the Signal Clamp
- 6 How to Use the Property Connection Set
- 7 How to Use the Sonde
- 8 Care and Transport
- 9 Safety Directions
- 10 Technical Data
- 11 International Limited Warranty
- Appendix A Functional Checks
- Appendix B World Frequency Zones
- Index
EZiSYSTEM, Safety Directions 71
EN
Warning Risk of electric shock when removing the Transmitter's battery pack.
Precautions:
Before removing the battery pack switch the transmitter off and remove any cable set or
accessories from the connection socket.
Caution The Transmitter's battery pack may get hot after prolonged use.
Precautions:
Allow the battery pack to cool down before removing.
Warning If the product is improperly disposed of, the following can happen:
• If polymer parts are burnt, poisonous gases are produced which may impair health.
• If batteries are damaged or are heated strongly, they can explode and cause poisoning,
burning, corrosion or environmental contamination.
• By disposing of the product irresponsibly you may enable unauthorised persons to use
it in contravention of the regulations, exposing themselves and third parties to the risk
of severe injury and rendering the environment liable to contamination.
• Improper disposal of silicone oil may cause environmental contamination.
Precautions:
Product specific treatment and waste management information can be downloaded from
the Cable Detection home page at http://www.cabledetection.co.uk/treatment or received
from your Cable Detection dealer.
The product must not be disposed with household waste. Dispose of the
product appropriately in accordance with the national regulations in force in
your country. Always prevent access to the product by unauthorised
personnel.