Product Manual
Table Of Contents
- Introduction
- Table of Contents
- 1 General Information
- 2 How to Use the Locator
- 3 How to Use the Transmitter
- 4 How to Use the Conductive Rod
- 5 How to Use the Signal Clamp
- 6 How to Use the Property Connection Set
- 7 How to Use the Sonde
- 8 Care and Transport
- 9 Safety Directions
- 10 Technical Data
- 11 International Limited Warranty
- Appendix A Functional Checks
- Appendix B World Frequency Zones
- Index
EZiSYSTEM, Technical Data 87
Environmental specifica-
tions
Conformity to national
regulations
Type Description
Temperature Operating -20°C to +50°C
-4°F to +122°F
Storage -40°C to +70°C
-40°F to +158°F
Protection against
Water, Dust and
Sand
With cover open IP54 (IEC 60529)
Dust-protected
With cover closed
and secured
IP65 (IEC 60529)
Dust tight, Low power water jets.
Humidity 95% RH non condensing
The effects of condensation are to be effectively
counteracted by periodically drying out the
product.
• FCC Part 15 (applicable in US)
• Hereby, Cable Detection Ltd, declares that the EZiTEX t100/t100xf/t300/t300xf is in
compliance with the essential requirements and other relevant provisions of Direc-
tive 1999/5/EC. The declaration of conformity may be consulted at http://www.cable-
detection.co.uk/ce.
Class 1 equipment according European Directive 1999/5/EC (R&TTE) can be
placed on the market and be put into service without restrictions in any EEA
member state.
• The conformity for countries with other national regulations not covered by the FCC
part 15 or European directive 1999/5/EC has to be approved prior to use and opera-
tion.