Product Manual
Table Of Contents
- Introduction
- Table of Contents
- 1 General Information
- 2 How to Use the Locator
- 3 How to Use the Transmitter
- 4 How to Use the Conductive Rod
- 5 How to Use the Signal Clamp
- 6 How to Use the Property Connection Set
- 7 How to Use the Sonde
- 8 Care and Transport
- 9 Safety Directions
- 10 Technical Data
- 11 International Limited Warranty
- Appendix A Functional Checks
- Appendix B World Frequency Zones
- Index
EZiSYSTEM, Functional Checks 97
Appendix A Functional Checks
A.1 Locator Functional Check
Checking the function Before any tests can be carried out it is vital to check the status of the unit, its batteries and
basic functionality.
The following list is used to achieve this.
1. Inspection
Once the general condition of the Locator is established the Audio Visual test can be
performed.
2. Audio / Visual display test
Upon depressing the trigger the Locator should test the display and speakers by illumi-
nating each segment in the bar display, the mode and function indicators and depth
display, the battery indicator light will illuminate throughout the display test. All LCDs must
be operative and an audible output must be heard.
•Casing The casing should be free of significant damage.
• Labels Body labels must be legible and intact. Display label must be
free of damage and tears.
• Battery hatch The hatch must lock into place.
• Battery holder All the battery contacts and springs on the holder must be free
of corrosion and the holder in good condition.
• Battery contacts The battery contacts must be free of corrosion.