User Manual

Total Station Manual

3.4 Code

The code contains the information about the recording points, in the process of

post-processing, with the help of encoding function , you can process conveniently

according to the specific group.The function of “File Manager” also contains the

information of code.

Simple Oeration of Code

1. Move the cursor to the line of Code.

2. Enter the name of Code.

3. Press the key of [ALL] to start the distance measurement and record the data of

code and measurement at the same time. If the name of code already exists in the

code library, it will extract the information of code in the code library to record at

the same time.

Steps Key Display

Move the cursor to the line

of Code.

Enter code and press

[ENT] to make sure. The

entered code here will not be

added to the code library.

Input

code

[ENT]

3 Press [F1] to start to

measure, record the code and

the daa of measurement to job

at the same time.



:The order to save code and measurement data is set in the “Setting” function.

The set items of code record are Before REC and After REC.