User Manual

Total Station Manual
90
7. Resection
Resection measurement is an application used to determine the coordinate of the
instrument station by measuring multiple known points. A minimum of 2 and a
maximum of 5 known points can be used to determine the station. It should be used at
least 2 known points by distance measurement or at least 3 known points by angle
measurement.
Steps Key Display
ƻ
1 Select “Program” from the
[Main Menu] window, press
[F3] or number key [3] to
enter the Resection
application.
[F3]
ƻ
2 Press [F1] in the
[Resection] window to set the
job.
[F1]
ƻ
3 In [Set Job] window, press
[F1] (List) to select a job in
memory or press [F2] (New)
to new a job. Then press [F4]
(OK) to next step.
[F4]