Operation Manual

ManualsBrandsGeonav ManualsMarine4C

GEONAV 4C - Car Navigation System

TABLE OF CONTENTS

Chapter 1

WELCOME, WARNING------------------------------------------------------------------------------------------------ page 2

ORGANIZATION NOTES, INTRODUCTION--------------------------------------------------------------------- page 2

THE KEYBOARD AND ITS FUNCTIONS-------------------------------------------------------------------------- page 3

SYMBOLS, GETTING STARTED------------------------------------------------------------------------------------- page 4

SETUP: marine navigator, screen, street navigation , unit and languages, other ---------------- page 5

MARKER ------------------------------------------------------------------------------------------------------------- page 6

ADDRESSES ------------------------------------------------------------------------------------------------------------- page 7

NEAR ------------------------------------------------------------------------------------------------------------------ page 8

ITINERARY WITH THE CURSOR, DATA WINDOW-------------------------------------------------------- page 9

VOICE INSTRUCTIONS ---------------------------------------------------------------------------------------------- page 10

Chapter 2

TECHNICAL DATA ---------------------------------------------------------------------------------------------------- page 11

Chapter 3

INSTALLATION AND PRECAUTIONS: IPX7 waterproof, cleaning, GPS Installation------------- page 12

Incorporated GPS antenna, External GPS antenna -------------------------------------------------------- page 12

CONNECTIONS: power supply, Power supply from mains, battery pack ------------------------- page 13

INSTALLATION OF THE CARTRIDGE: installation of the CompactFlash™------------------------ page 14

removal of the CompactFlash™----------------------------------------------------------------------------------- page 14

Summary of content (15 pages)

PAGE 1
GEONAV 4C - Car Navigation System TABLE OF CONTENTS Chapter 1 WELCOME, WARNING------------------------------------------------------------------------------------------------ page 2 ORGANIZATION NOTES, INTRODUCTION--------------------------------------------------------------------- page 2 THE KEYBOARD AND ITS FUNCTIONS-------------------------------------------------------------------------- page 3 SYMBOLS, GETTING STARTED-------------------------------------------------------------------------------
PAGE 2
CHAPTER 1 WELCOME! We thank you for choosing the GEONAV 4C – Car Navigation System. Please read the instructions on how to use the product carefully to have the best performance for a safe and valid use for your trips. This manual will guide you through the use of the GEONAV 4C “C N S”, describing its main features, functions and technical points.
PAGE 3
The GEONAV comes with an internal 12-channel GPS antenna. An external antenna can be connected for use under special conditions or on high-shielded vehicles. Thanks to the great capacity of the new CompactFlash™ cartridges, the instrument can store countless addresses and Markers. See page 14 "Installation/Removal of Compact Flash" The device can be configured for sea or road navigation. Sea navigation and road navigation are two separate applications that cannot operate at the same time.
PAGE 4
SYMBOLS Location defined by the GPS.
PAGE 5
SETUP Press , and select SETUP with . In the sub menus, you can select the following options: “NOTE”: These manoeuvres are common to all the functions accessible from the menu. Explore the countless options which are proposed in the menus and sub-menus, After gaining confidence with GEONAV, you will be able to take advantage of all of its possibilities and learn the functions of the C.N.S.
PAGE 6
MARKER Enter: • To move the cursor on the map to the desired point, press Marker and confirm by pressing symbol and the name. Use the . In the dialogue box, use to select . A window will appear to define the Up/Down, Right/Left cursor to change the symbol and the alpha-numeric characters to change the name. Marker symbols 1) 2) 3) 4) 5) 6) 7) 8) Marker menu: • Press the key, select the Marker from the list with the .
PAGE 7
ADDRESSES The Addresses menu opens with . The window that appears prompts a list of addresses already memorized or offers the possibility to enter a new address. After confirming, the addresses will be displayed in the list New - without virtual keyboard – (setup/keyboard/off) • Use to move down and then right to enable the box “ NEW ”. Use the key Up/Down and Right/Left, to enter the first or several letters of the desired locality.
PAGE 8
symbols and their meaning. The symbol selected opens the list of sites present, making the choice possible. Defining the NAME displays the preset list of possible choices. The selection should be confirmed with • . After the address is entered, it can be defined as Destination, Marker, or Starting point in the dialogue box. . Confirm with NB: If a Starting point and a Destination have been selected, the route will be calculated and highlighted in green on the map.
PAGE 9
ITINERARY WITH In addition to the methods described in the previous chapters, a route can be defined using only the cursor. • In the absence of a valid Fix, you have to set the departure and the Destination points • Position the cursor on a point on the screen and press dialogue box . In the define it as departure and confirm with will be displayed near to the cursor. . A flag • Position it on a new point and press .
PAGE 10
Trip data: this window provides information on the distance travelled, time of travel elapsed, average speed, maximum speed reached since the last reset or the last destination set. VOICE INSTRUCTIONS As mentioned in the introductory chapter, in compliance with the safety criteria, the CNS helps you to follow the itinerary defined with voice instructions. The power cord includes a speaker with adjustable volume and jack for the external GPS powered by this cord.
PAGE 11
CHAPTER 2 TECHNICAL DATA General characteristics • Compact cartographic plotter with incorporated 12-channel GPS • Acquisition time of satellites with internal GPS 2 minutes for FIX OK (normal conditions) 15 minutes for first FIX • GOTO function • GPS interface external NMEA 0183 • Rotation of the map (head-up display) • Autozoom™ function • 8 marker symbols, 8 characters for the marker name • selected unit of measure (metres/kilometres or miles) • 9 zoom levels • Direction vector • CompactFlash™ Cartridge
PAGE 12
• Resolution: 240 X 320 pixel • RISC ARM9 microprocessor Accessories • Bracket for permanent installation • Power cord with cigarette lighter adapter • User manual Technical details Processor: ARM9 200 Mhz. micro controller Memory: SDRAM: 64MB.-Flash Memory: 8MB (NAND).-Compact Flash/ SD Card socket GPS: built in GPS USB cable: for transferring data from the PC to CompactFlash™ Audio cable: NMEA 0183 (1 Input, 1 Output). Operating system: Linux (with GEONAV data).
PAGE 13
“NOTE”: it is best to thread the wire between the door and the chassis so that the gaskets will protect it CONNECTIONS Power supply: GEONAV can be powered with the incorporated battery back or by plugging the power cord into the cigarette lighter. Insert the cable, matching the arrows of the connector to the arrows on the entrance (see figure), pushing gently until it snaps in. To remove the cable, pull the ring outward without turning.
PAGE 14
“NOTE”: This potential damage is not included under the warranty. If rechargeable batteries are used, the selector can be in the “Rechargeable” or “Alkaline” position. However, the recharging function of the batteries is activated only if the selector is in the “Rechargeable” position. Before remounting the battery pack, check that the contacts are clean and dry. Make sure that the rubber seal of the housing and the rubber O-rings of the mounting screws are clean and positioned correctly.
PAGE 15
HAVE A NICE TRIP! 15