Hardware Guide
Table Of Contents
Installation Guide Tenera
This material is the property of GeoNavo Positioning Systems, Inc. It may contain certain confidential and proprietary information and is not to
be reproduced, distributed or otherwise disclosed to any third party without permission of GeoNav
o Positioning Systems, Inc. All rights,
including copyright and patent rights are reserved by GeoNavo Positioning Systems, Inc. © 2017 GeoNavo Positioning Systems,
Inc.
10
5. Once you select the provision, you will place the blue dot where the beacon is
deployed in the facility. Ensure you are in the correct room.
6. The X & Y coordinates will automatically generate based on where you placed the
beacon. You will need to enter the Z coordinate in meters. Select provision once
you confirm the coordinates.