Hardware Guide

Installation Guide Tenera
This material is the property of GeoNavo Positioning Systems, Inc. It may contain certain confidential and proprietary information and is not to
be reproduced, distributed or otherwise disclosed to any third party without permission of GeoNav
o Positioning Systems, Inc. All rights,
including copyright and patent rights are reserved by GeoNavo Positioning Systems, Inc. © 2017 GeoNavo Positioning Systems,
Inc.
3
1.1 HARDWARE OVERVIEW
The system is 100% designed and manufactured in Canada. In order to locate a resident,
staff, visitor, contractor or asset the system triangulates the location utilizing Ultra-
Wideband (UWB) radio technology. The system relies on 4 key pieces of technology in
order to triangulate the X-Y-Z three-dimensional location and consists of the following:
1. Tenera Bracelet:
The bracelet is a sleek and comfortable wearable that broadcast its location every
second to the beacons. It uses IEEE802:15.4-2011 UWB technology for the highest
accuracy positioning available. The bracelet is dust and water resistant with an
IP67 rating. Rechargeable Lithium Ion batteries are used to make maintenance and
recharging easy. The straps use standard 18mm mounting hardware and can be
customized to suit the user with different color options and locking mechanisms.
To turn the bracelet on, hold down the red button for 10 seconds. The button will
then flash a light to confirm it’s on. To turn the bracelet off, hold down the red
button for 10 seconds. If you push the red button and the led lights up, then you
know the bracelet is turned on. If you push the red button and the led does not light
up, then you know the bracelet is turned off.