Hardware Guide
Table Of Contents
Installation Guide Tenera
This material is the property of GeoNavo Positioning Systems, Inc. It may contain certain confidential and proprietary information and is not to
be reproduced, distributed or otherwise disclosed to any third party without permission of GeoNav
o Positioning Systems, Inc. All rights,
including copyright and patent rights are reserved by GeoNavo Positioning Systems, Inc. © 2017 GeoNavo Positioning Systems,
Inc.
7
4. Select the device you want to provision.
5. Enter all of the information provided to you by the lead or project manager. This
should include the Wireless SSID, the Wireless Password, your name, the Facility
Name, Building Name, & Floor. The information only needs to be entered in one
time and then each subsequent beacon you provision will remember the
information. Once you verify the information is correct select “Provision”
6. Once you press the “Provision” button, the beacon will start provisioning. You will
see a message displaying “Session Established” & then “Configuration Successfully
Applied”