User's Manual

Quick Start Guide UtilityScan 350HS

Powering Down

It is essential that these steps are followed in order when powering down the

system. Failure to do so may

result in boot-up issues*.

1 Tap on System Options.

2 Tap on System

Shutdown.

3 Tap either:

• Exit: Close Application to return to start screen. At this point,

press and hold the power button for about 3 seconds. The system

will shut down properly.

• Power Off: Close Application and turn OFF System power. The

system will automatically shut down. (Recommended)

* If the system was not powered down properly and before the next time you

power up, you must remove and disconnect the battery on the antenna, then

re-connect it. This will turn the antenna off, then back on. You can now

power up normally.