User's Manual
Table Of Contents
- QF7D50300800 Manual
- Keyboard Capability 2
- ToughBook Information 3
- Standard Icons 4
- Display Channel (Frequency) Icons 4
- Powering and Booting Up 5
- Powering Down 7
- Playback Only Mode 8
- New Project Mode and Last Project Mode 20
- Collecting Data 32
- Limited Warranty, Limitations Of Liability And Restrictions
- Regulatory Information
- Section 1: Getting Started
- Keyboard Capability
- ToughBook Information
- Standard Icons
- Display Channel (Frequency) Icons
- Powering and Booting Up
- Powering Down
- Section 2: Playback Only, New Project, and Last Project Modes
- Playback Only Mode
- New Project Mode and Last Project Mode
- Collecting Data
- Appendix A: Cart and Antenna Assembly Instructions
- Appendix B: Battery Charger Information
- Appendix C: Dielectrics of Common Materials (Soil Conditions)
- Appendix D: Examples of Some Common Objects
- Appendix E: Glossary of Terms
- PageBreak
- Y15198D1 GPR Coordination Notice& Equip Reg
- Canadian Requirements for RSS
- Equipment CE Conformance
Quick Start Guide UtilityScan DF
Copyright © 2012 Geophysical Survey Systems, Inc. 20
All Rights Reserved
New Project Mode and Last Project Mode
• New Project Mode will allow you to configure the system as desired for a new project or continue with an old
project.
• Last Project Mode will bypass the Folder selection screen and continue with the last project with all its settings
from the last project. In this mode, you still can make changes to the settings.
• In either mode, the options are the same.
After selecting New Project, select which folder you would like to save your data, or
create a new folder for a new project.
You may do one of the following:
a) Tap on the arrows and select a folder (project. All files save will be saved to
this folder and the name of the files will be folder name + a sequential
number. Tap on Accept to the continue.
b) Tap on New Data Path to create a new folder (project).
• Enter and save the new folder (project) name.
• Highlight the new folder (project) by tapping on the arrows.
• Tap on Accept to continue.
c) Tap on Cancel. The files will be saved to the last folder that was used.