User's Manual
Table Of Contents
- QF7D50300800 Manual
- Keyboard Capability 2
- ToughBook Information 3
- Standard Icons 4
- Display Channel (Frequency) Icons 4
- Powering and Booting Up 5
- Powering Down 7
- Playback Only Mode 8
- New Project Mode and Last Project Mode 20
- Collecting Data 32
- Limited Warranty, Limitations Of Liability And Restrictions
- Regulatory Information
- Section 1: Getting Started
- Keyboard Capability
- ToughBook Information
- Standard Icons
- Display Channel (Frequency) Icons
- Powering and Booting Up
- Powering Down
- Section 2: Playback Only, New Project, and Last Project Modes
- Playback Only Mode
- New Project Mode and Last Project Mode
- Collecting Data
- Appendix A: Cart and Antenna Assembly Instructions
- Appendix B: Battery Charger Information
- Appendix C: Dielectrics of Common Materials (Soil Conditions)
- Appendix D: Examples of Some Common Objects
- Appendix E: Glossary of Terms
- PageBreak
- Y15198D1 GPR Coordination Notice& Equip Reg
- Canadian Requirements for RSS
- Equipment CE Conformance
Quick Start Guide UtilityScan DF
Copyright © 2012 Geophysical Survey Systems, Inc. 23
All Rights Reserved
Main Menu Options (Right Pane of the Screen)
Scan Process Icon
• Scan
• Depth Range: Enter the depth penetration.
• Dielectric Constant: Enter the Dielectric of the soil (See Appendix C for more Dielectric information).
• Soil Type: Determine the soil conditions. This will change the Dielectric Value.
• Scan Density: Set number of scans per unit (meter or feet).
• High (100 scans/m, 30 scans/ft)
• Normal (50 scans/m, 15 scans/ft)
• AutoSave File
• Off: User is prompted to save a file.
• On: System will automatically save a file.